1. Flat order. The disadvantage is that the nails will rust over a long time, resulting in loose pages of the album, which has been rarely used. Another disadvantage is that the flat binding must occupy a certain width of the binding opening, that is, there is a distance between the binding position and the book, so that the page can only be in the form of "incomplete opening", which is not convenient to read. It is generally suitable for books with more than 300 pages.

2、骑马订。书页依靠2个铁丝钉联结，和平常大家用的订书器的钉子差不多，在画册印刷中，骑马订相对比较便宜，不过不太适合太厚的画册，一般来说28页以内的数量已经很厚了了，厚的册子用骑马订不显档次的。

2. Horse riding order. The book pages are connected by two iron nails, which is similar to the nails of the stapler we usually use. In the printing of picture books, the price of horse riding is relatively cheap, but it is not suitable for too thick picture books. Generally speaking, the quantity within 28 pages is already very thick, and the thick books are not high-grade.

3、锁线订。又叫串线订，书芯虽然比较牢固，但由于书背上订线较多，导致平整度较差。

3. Sewing. It is also called string binding. Although the book block is relatively firm, the flatness is poor due to more binding lines on the back of the book.

4、无线胶订。无线胶订的**非常好，目前，大量的画册印刷都采用这种装订方式。但由于热熔胶质量没有相应的行业标准或**标准，使用方法还不规范，故胶订书籍的质量尚没有达到令人满意的程度，一些质量不好的熔胶时间没多久*干裂了，特别北方干燥，书整个*散架了，所以条件允许，书籍的保存时间要求长久的情况下，可特别提出要质量好的熔胶。

4. Wireless binding. The performance of wireless binding is very good. At present, a large number of picture album printing adopt this binding method. However, as there is no corresponding industry standard or * * standard for the quality of hot melt adhesive and the use method is not standardized, the quality of bound books has not reached a satisfactory level. Some poor quality melt adhesive has not been dry for a long time, especially in the north, and the whole book has been scattered. Therefore, if conditions permit and the storage time of books is required to be long, it can be specially proposed to have high-quality melt adhesive.

5、锁线胶背订。又叫锁线胶订，过程是先锁线再上胶，上胶时不再铣背。这种装订方法装出的册子结实且平整，目前使用这种方法的书籍也比较多。

5. Sewing glue back binding. It is also called sewing and binding. The process is to lock the thread first and then glue it. When gluing, there is no milling back. The booklets packed by this binding method are solid and flat, and there are many books using this method at present.

6、塑料线烫订。目前这种方式是属于比较优良的装订方式，其特点是书芯中的书帖经过两次黏结，前一次黏结的作用是将塑料线订脚与书帖纸张黏合，使书帖中的书页得以固定;后一次黏结是通过无线胶黏订将塑料线烫订的书芯黏结成书芯，这种办法订成的书芯非常牢固，并且由于不用铣背打毛，减少了胶质不良对装订质量的影响。目前国内印刷厂用的也不是太多。。

6. Plastic thread ironing. At present, this method is an excellent binding method, which is characterized in that the book post in the book block is bonded twice. The function of the previous bonding is to bond the plastic thread binding foot with the book post paper, so that the book pages in the book post can be fixed; The latter binding is to bind the book block ironed with plastic wire into a book block through wireless adhesive binding. The book block made by this method is very firm, and because there is no need to mill the back and roughen, the impact of poor glue on the binding quality is reduced. At present, domestic printing plants do not use too much..

以上就是为大家介绍的有关济南精装书制作的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务https://www.sdhzyw.com/

The above is a detailed introduction to the production of hardcover books in Jinan. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service https://www.sdhzyw.com/