裁切边缘距离版面上的文字须大于3mm，以免裁切时不小心切到文字。文字须转曲线或描外框且不要使用系统字，否则会造成笔划交错处有白色节点。文字转成曲线后，请注意字间或行间是否有跳行或互相重叠的错乱现象。如果笔划交错处有白色节点，以打散的指令处理即可。黑色文字不要选用套印填色。
The distance between the cutting edge and the text on the layout must be greater than 3mm to avoid accidentally cutting the text during cutting. The text must be curved or framed, and do not use system characters, otherwise it will cause white nodes at the intersection of strokes. After the text is converted into a curve, please pay attention to whether there is any jumping or overlapping between words or lines. If there are white nodes at the intersection of strokes, the scattered instructions can be used for processing. Do not use overprint coloring for black text.
同一文档在不同次印刷时，色彩一般会有差异，色差度在百分之十以内视为正常（因墨量控制每次都会有不同所致的），大机印刷难免会顾此失彼，如有旧档要加印，为避免色差过大，只能参照本公司所出的数码色样。不同次的印刷成品所出现的色差是不能够作为退货理由的。
When the same document is printed in different times, there are generally differences in color, and a color difference of less than 10% is considered normal (due to different ink volume control each time). Large machine printing may inevitably overlook this issue. If there are old files to be printed, in order to avoid excessive color difference, we can only refer to the digital color samples provided by our company. The color difference caused by different printed products cannot be used as a reason for return.
彩印时不能以萤幕或打印机列印的颜色来要求印刷色，客户制作时须参照CMYK色谱的百分数来决定制作填色。同时注意不同厂家生产的CMYK色谱受采用的纸张油墨种类印刷压力等因素的影响，同一色块也会存在一定的差异。
During color printing, the printing color cannot be required based on the color printed on the screen or printer. Customers must refer to the percentage of CMYK chromatography to determine the color filling during production. At the same time, it should be noted that the CMYK chromatography produced by different manufacturers is influenced by factors such as the type of paper ink used, printing pressure, and the same color block may also have certain differences.
彩印时色块之配色请尽量避免使用深色或满版色之组合，否则印刷后裁切容易产生背印的情况。名片印刷时由于量比较少，正反面有相同大面积色块的地方，难以保障一致及毫无墨点，不得因此作为退货理由。
When color printing, please try to avoid using a combination of dark or full color blocks, otherwise cutting after printing may result in back printing. When printing a business card, due to the relatively small quantity and the same large area of color blocks on the front and back, it is difficult to ensure consistency and no ink spots, and therefore cannot be used as a reason for return.
画册印刷的底纹或底图颜色不要低于百分之十，以避免印刷成品时无法呈现出来。
The shading or color of the artwork should not be less than 10% to avoid rendering the finished product during printing.
画册印刷所有输入或自绘的图形，其线框粗细不可小于0.1mm，否则印刷品会造成断线或无法呈现的状况。另外线框不可设定“随影像缩放”，否则印刷输出时会形成不规则线。
All input or self drawn graphics in the picture album should have a wireframe thickness of no less than 0.1mm, otherwise the printed material may cause broken lines or render impossible. In addition, the wireframe cannot be set to "zoom with image", otherwise irregular lines will be formed during printing output.
双面双折名片印刷时请标示折线及正反面。
When printing double-sided double fold business cards, please indicate the crease and front and back sides.
无论名片印刷还是卡片印刷，不论单面印刷还是双面印刷，也不论人数多少或款式多少，一律置于同一页面，不要分页制作。
Whether it is business card printing or card printing, whether it is single sided printing or double-sided printing, and regardless of the number of people or styles, they are all placed on the same page and should not be produced in separate pages.
稿件完成不需画十字线及裁切线，可用2个隐形的线框来充当制作尺寸和出血线92x56mm，裁切后为90x54mm(即四边各保留1mm出血)。如有特殊的尺寸需要，请在定单里及所上传的文档材料中特别注明出来。
The completion of the manuscript does not require drawing cross lines or cutting lines. Two invisible wireframes can be used to serve as production dimensions and bleeding lines of 92x56mm. After cutting, the size is 90x54mm (i.e. 1mm bleeding is reserved on each side). If there are special dimensions required, please specify them in the order and the uploaded documentation.
还有一点要特别注意：有任何图片色块或线超出制作尺寸时，请一律置入图框内。勿用白色块遮掩，以免造成合版时有困扰因素。
Another point to pay special attention to: if any color blocks or lines in the picture exceed the production size, please place them all in the frame. Do not use a white block to cover it up, as it may cause trouble during plate assembly.
The exciting content of this article is provided by the knowledge provided by Jinan Book and Magazine Printing. There are also many exciting content on this website, and you can click to enter more content: https://www.sdhzyw.com We have dedicated customer service to answer your questions
