彩色印刷在设计及印刷中要注意什么？彩色印刷要想做好，是需要一定的知识储备的，如果没有相应的知识技巧，很容易在印刷时出现各种问题，影响印刷效果，那么彩色印刷在设计及印刷中要注意什么？下面
济南彩色设计印刷厂家小编就给大家详细介绍一下。
What should we pay attention to in the design and printing of color printing? Color printing needs a certain amount of knowledge to do well. If there is no corresponding knowledge and skills, it is easy to have various problems in printing and affect the printing effect. So what should be paid attention to in the design and printing of color printing? Now let's give a detailed introduction to Jinan Color Design and Printing Factory.
彩色印刷在设计及印刷中要注意以下几点：
The following points should be noted in the design and printing of color printing:
1、字形过小的文字应避免选择笔画太细的字体，比如仿宋体、细圆体等，字体的笔画原本就细，如果字形过小，印刷时笔画就容易丢失，导致字迹不全；
1. For characters with too small font size, avoid selecting fonts with too thin strokes, such as imitation Song typeface, thin circle, etc. The strokes of the font are originally thin. If the font size is too small, the strokes will be easily lost during printing, resulting in incomplete handwriting;
2、尤其是细小的文字，应避免使用多色套印；
2. In particular, the use of multicolor overprinting should be avoided for small text;
3、尽量避免使用细小的反白文字；
3. Try to avoid using small anti-white words;
4、细小的文字应避免叠印在深色的背景上；
4. Small text should avoid being overprinted on a dark background;
5、细小的文字应避免使用金墨、银墨印刷，金墨、银墨的颗粒比一般油墨粗，用于印刷细小的文字时，容易导致字迹模糊等问题；
5. Gold and silver ink should be avoided for printing small words. The particles of gold and silver ink are thicker than ordinary ink. When used for printing small words, it is easy to cause problems such as blurred handwriting;
6、尽可能采用叠印方式在底色上印文字和图片，而不用在底色版上挖空的方式。
6. Try to use overprint to print text and pictures on the background instead of hollowing out on the background.
而且纸张外表越粗糙，油墨的吸收量就越大。打印纸的粗糙外表，油墨泛滥现象更容易出现。这是因为有些纸张纤维的交织发生的间隙，均匀的涂层还没有很好的覆盖。这种压纹纸和印版时，油墨层外表发生不良接触。如果通过适当的印刷压力，可以有足够的接触时间与油墨层的布局的纸张的平滑性差，实现均匀的压印接触，可以确保印刷墨层均匀平服。
And the rougher the paper surface, the greater the ink absorption. The rough appearance of printing paper and ink flooding are more likely to occur. This is because some paper fibers have not been well covered by the uniform coating due to the interlacing gap. When the embossed paper and the printing plate, the surface of the ink layer has a bad contact. If proper printing pressure is applied, enough contact time can be available and the smoothness of the paper with the layout of the ink layer is poor, so as to achieve uniform imprint contact, which can ensure that the printing ink layer is uniform and flat.
These are the matters needing attention in the design and printing of color printing. Only taking these conditions into consideration can ensure the printing effect and satisfy customers. If you want to continue to learn about the printing manufacturer or more relevant information, please visit our website https://www.sdhzyw.com ！
