In the printing of color printed matter, there are many factors that will affect the quality of printed matter, resulting in a lot of printed matter not being well produced, of which overprinting is one of the main factors affecting the quality of printed matter. However, many factors will affect overprinting in the printing process. Therefore, pay attention to the following two points on the paper and printing plate during printing:

一、纸张外表越粗糙，油墨的吸收量就越大。打印纸的粗糙外表，油墨泛滥现象更容易出现。这是因为有些纸张纤维的交织发生的间隙，均匀的涂层还没有很好的覆盖。这种压纹纸和印版时，油墨层外表发生不良接触。如果通过适当的印刷压力，可以有足够的接触时间与油墨层的布局的纸张的平滑性差，实现均匀的压印接触，可以确保印刷墨层均匀平服。

1、 The coarser the surface of the paper, the greater the amount of ink absorbed. The rough surface of the printing paper makes the ink overflow more likely. This is because the gap between the interlacing of some paper fibers and the uniform coating are not well covered. This kind of embossing paper and printing plate, the surface of the ink layer has bad contact. If an appropriate printing pressure is applied, the smoothness of the paper having sufficient contact time and the layout of the ink layer is poor, and uniform imprinting contact can be realized, and the printing ink layer can be ensured to be uniform and flat.

二、保守胶合板面前底部支架的印刷版，不只有许多弊端，容易呈现油墨转移不良现象，引起油墨布局不均的发生。这是因为木材的底部托盘不够强，变形的可能性也比较大，导致不稳定的印刷压力，油墨层的布局不能均匀地转印到纸张上。好的方法就是做好备份操作技术，一些印刷板面积较大，应选择一些平整度好，比拟扎实的金属版本的护理，可以更好的防止这些现象的发生。

2、 The printing plate of the bottom support in front of the conservative plywood has not only many disadvantages, but also is prone to poor ink transfer, resulting in uneven ink layout. This is because the bottom tray of the wood is not strong enough and the possibility of deformation is relatively large, resulting in unstable printing pressure and the layout of the ink layer cannot be uniformly transferred to the paper. A good method is to do a good job in backup operation technology. Some printed boards have a large area, so we should choose some metal versions with good flatness and solid care, which can better prevent these phenomena

彩色印刷品在设计和叠印的处理上要注意以下六点：

The following six points should be paid attention to in the design and overprinting of color printing:

1、字形过小的文字应避免选择笔画太细的字体，比如仿宋体、细圆体等，字体的笔画原本就细，如果字形过小，印刷时笔画就容易丢失，导致字迹不全；

1. If the font is too small, the font with too fine strokes should be avoided, such as imitation song style and fine round style. The strokes of the font are originally thin. If the font is too small, the strokes are easy to be lost during printing, resulting in incomplete handwriting;

2、尤其是细小的文字，应避免使用多色套印；

2. In particular, the use of multicolor overprint should be avoided for small words;

3、尽量避免使用细小的反白文字；

3. Try to avoid using small anti white words;

4、细小的文字应避免叠印在深色的背景上；

4. Small words should not be overprinted on the dark background;

5、细小的文字应避免使用金墨、银墨印刷，金墨、银墨的颗粒比一般油墨粗，用于印刷细小的文字时，容易导致字迹模糊等问题；

5. Small characters should be printed with gold ink and silver ink. The particles of gold ink and silver ink are thicker than those of ordinary ink. When used for printing small characters, it is easy to cause problems such as blurred handwriting;

6、尽可能采用叠印方式在底色上印文字和图片，而不用在底色版上挖空的方式。

6. Try to use overprinting method to print words and pictures on the background color, instead of hollowing out on the background color plate.

在彩色印刷品设计印制时注意这些问题，可防止后面发生很多不必要的浪费，还可呈现给客户精美的印品，何乐而不为呢。

Pay attention to these problems in the design and printing of color printing materials, which can prevent a lot of unnecessary waste behind, and can also present the customers with beautiful printing materials. Why not.

以上就是为大家介绍的有关济南彩色印刷设计的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务https://www.sdhzyw.com/

The above is a detailed introduction about Jinan color printing design. I hope it will help you. If you have any questions, please contact us. We will provide you with services with a professional attitude https://www.sdhzyw.com/