宣传单页印刷完成后，为了使其更加美观大方，我们通常会进行各种印后加工技术。下面我们来介绍一下
济南宣传单页印刷的加工技术，如下：
After the leaflet is printed, in order to make it more beautiful and generous, we usually carry out various post-press processing technologies. Now let's introduce the processing technology of Jinan leaflet printing, as follows:
1.覆膜：覆膜可分为光泽膜和哑光膜。光膜是在表面具有反射作用的膜，能提高印刷品的亮度、平滑度，使色彩更鲜艳、更生动，更具有时尚感。同时，它还可以防水，增加耐久性，并抵抗皱纹。
1. Film covering: film covering can be divided into glossy film and matte film. Light film is a film with reflective effect on the surface, which can improve the brightness and smoothness of the printed matter, make the color more bright, vivid and fashionable. At the same time, it can also be waterproof, increase durability and resist wrinkles.
2.圆角：印刷品一般在印刷后不经加工而裁切，即裁切成直角。当然，如果你想把它削成圆角，也是可以的。圆角一般为4MM左右。
2. Round corner: printed matter is generally cut without processing after printing, that is, cut into right angles. Of course, if you want to cut it into round corners, you can also. The fillet is generally about 4MM.
3.异形加工：异形是指各种不规则的形状。这个过程就是生产一个模具。根据形状制作模具。成品印刷完成后，可随模具切割成异形。
3. Abnormal processing: abnormal refers to various irregular shapes. This process is to produce a mold. First, make the mold according to the shape. After the finished product is printed, it can be cut into special shapes with the mold.
4.折叠过程：有半折、眼袋折、心折、器官折、半折、两折，所有这些都可以根据大小折叠、卷曲、。
4. Folding process: there are half fold, eye bag fold, heart fold, organ fold, half fold and two fold, all of which can be folded, curled and folded according to size.
5.镂空工艺：镂空有点像异形，同样需要模压，但异形是切割外部，镂空是切割印刷品内部。
5. Hollow-out process: hollow-out is a bit like a special shape, which also needs to be molded, but the special shape is to cut the outside, and the hollow-out is to cut the inside of the printed matter.
6.烫印工艺：烫印不限于纸张，任何纸张无论哪种方式，烫印都须先为要烫印的零件制作一个模具。打印时，一定要去掉烫印件。打印后，可进行热烫印。
6. Hot stamping process: hot stamping is not limited to paper. No matter which way, hot stamping must first make a mold for the parts to be hot stamped. When printing, the hot stamping part must be removed. After printing, hot stamping can be performed.
7.凹凸工艺：学名叫压印，它依靠压力使被印物局部发生变化而形成图案。金属板被腐蚀后，成为压制用的压板和底板。凹凸制版纸一般较厚，因此，对压花名片的要求是，被压花的部分不能印刷，因为压花不准确，影响美观。
7. Bump process: scientific name is embossing, which depends on pressure to change the part of the printed object to form a pattern. After the metal plate is corroded, it becomes the pressing plate and base plate for pressing. The concave and convex plate making paper is generally thick, so the requirement for embossed business cards is that the embossed part cannot be printed because the embossing is inaccurate, which affects the beauty.
8.高端水晶工艺品：水晶工艺品对纸张有要求，铜版纸不能作为水晶工艺品使用，因为小型胶印机不能打印铜版纸，可以使用其他纸张（包括特种纸）。水晶工艺名片先在机器上打印，打印一次后，迫不及待地将墨汁干透后迅速涂上压花粉，放在压花机上（即水晶工艺），水晶工艺就完成了。
8. High-end crystal handicrafts: crystal handicrafts have requirements for paper. Coated paper cannot be used as crystal handicrafts, because small offset presses cannot print coated paper, and other paper (including special paper) can be used. The crystal craft business card is printed on the machine first. After printing it once, you can't wait to dry the ink and quickly apply the pressed pollen, and put it on the embossing machine (i.e. crystal craft). The crystal craft is completed.
This is the processing technology of the printed leaflet. We have learned this knowledge from eight aspects. I hope it can help you. More matters will come to our website https://www.sdhzyw.com Consult!
