济南华政印务印刷书籍主要由热熔胶绑定，使用不干胶胶顺序告诉热熔胶，热溶胶一般控制热熔胶的温度在160度，和只有在适当的操作温度，热熔胶生产强大的附着力，只有在适宜的温度将胶水涂在书中，书封面坚定地坚持，因此准确的温度控制胶锅是实现热熔胶佳粘接的关键。
Jinan Huazheng printing books are mainly bound by hot-melt adhesive. The self-adhesive adhesive is used to tell the hot-melt adhesive in sequence. The hot sol generally controls the temperature of the hot-melt adhesive at 160 degrees, and the hot-melt adhesive produces strong adhesion only at the appropriate operating temperature. Only when the glue is applied to the book at the appropriate temperature, the book cover firmly adheres to it, Therefore, accurate temperature control glue pot is the key to realize good bonding of hot-melt glue.
目前有一种冷胶，可根据情况直接使用或适当加水使用。冷胶的特点是附着力强，使用方便，但干燥速度慢。以热熔胶为例，分析其在使用过程中容易引起的纸张质量问题。
At present, there is a kind of cold glue, which can be used directly or add water appropriately according to the situation. Cold glue is characterized by strong adhesion, easy to use, but slow drying speed. Taking hot melt adhesive as an example, the paper quality problems easily caused by its use are analyzed.
济南华政印务为了防止胶印刷书籍的外观的页面，打开胶现象，但也需要改变传统的印前组装方法，传统的四倍到三倍，此外还注意气候和环境因素的影响不能忽略。同样在页面匹配的过程中，如果页面后的书帖没有直接完成进入下一个流程，那么很容易掉出页面的质量，所以书帖进入下一个流程，一定要完成。所谓整理，就是把书的半成品扎好，压实，并装订好，压实后的书背上涂上一层粘合剂，使书背牢固牢固，等书背上的粘合剂干燥后，再将书背单独安排好，进入下一道工序。
Jinan Huazheng printing in order to prevent the appearance of the pages of glue printed books and open the glue phenomenon, but it also needs to change the traditional prepress assembly method, which is four times to three times. In addition, it also pays attention to the influence of climate and environmental factors, which can not be ignored. Similarly, in the process of page matching, if the book post behind the page is not directly completed and enters the next process, it is easy to lose the quality of the page, so the book post must be completed before entering the next process. The so-called finishing is to bind, compact and bind the semi-finished products of the book, and apply a layer of adhesive on the compacted back to make the back firm. After the adhesive on the back is dry, arrange the back separately and enter the next process.
书籍用书页装订后的整理工作是整个不干胶装订过程中非常重要的一步。
The finishing of books after page binding is a very important step in the whole self-adhesive binding process.
The wonderful content of this article is provided by the printing of Jinan books and magazines. There are many wonderful content on this website. You can click to enter more content: https://www.sdhzyw.com We have special customer service to answer your questions
