欢迎您访问济南华政印务有限公司 网站!
客户服务热线

13698644688

当前位置:首页>>新闻中心>>公司新闻精装书制作方法和工艺流程你了解吗?
分类导航
联系我们
济南华政印务有限公司

联系电话:13698644688

服务热线:13698644688

联系地址:济南市历城区同华路1号

精装书制作方法和工艺流程你了解吗?

文章作者:华政印务 发布时间:2021-08-10 71
精装书指书籍的一种精致制作方法。精装书籍主要是在书的封面和书芯的脊背、书角上进行各种造型加工后制成的。加工的方法和形式多种多样,如书芯加工就有圆背(起脊或不起脊)、方背、方角和圆角等;封面加工又分整面、接面、方圆角、烫箔、压烫花纹图案等。下面,小编为大家讲解一下精装书的制作方法及工艺。
Hardcover refers to an exquisite method of making books. Hardcover books are mainly made after various modeling processing on the back and corner of the book cover and block. There are many kinds of processing methods and forms, such as round back (ridged or not ridged), square back, square corner and fillet; Cover processing is divided into the whole face, joint face, square corner, hot foil, hot embossing patterns and so on. Next, I will explain the production method and technology of hardcover book.
外观
appearance
皮壳方正、无污渍、无花痕、无皱、粘贴平实、无起泡、无破损,脊字分中、堵头布长度与厚度相齐不歪斜、圆脊起圆弧度一般情况大于书厚的5~6mm、书脊的弧度与书口弧度相称。
The leather case is square, no stain, no flower mark, no wrinkle, flat paste, no blister, no damage, the length and thickness of the middle ridge and plug cloth are in line with each other, and the arc of the round ridge is generally 5 ~ 6 mm larger than the book thickness, and the arc of the spine is commensurate with the arc of the book mouth.
内文
Text
内文衬纸与皮壳飘口三边位置一致,书芯一般小于皮壳3mm不歪斜,书脊与书口平实,方脊不出现喇叭型、无刀花、切斜,书芯与皮壳中心条位置无跌落,针孔无渗胶,串线无断线、线松、污渍,无大小页、页序乱,帖与帖之间胶水高度1~3mm,无空胶、假粘。
The position of the book block is generally 3mm smaller than the shell without skew, the spine and the book mouth are flat, the square ridge does not appear trumpet shape, no knife flower, oblique cutting, the position of the book block and the shell center bar does not fall, the pinhole does not have glue penetration, the string line does not have broken line, loose line, stains, large and small pages, page order disorder, the glue height between posts is 1 ~ 3mm, no empty glue, false glue.
      济南书刊杂志印刷
手感
feel
持书有实重感,书槽明显有凹陷感,翻动前后皮壳面180°无吱吱声响,皮壳面书槽与衬纸出现假粘现象 。
There is a real heavy feeling when holding the book, and there is an obvious concave feeling in the book slot. The leather surface is 180 before and after turning ° There is no squeaking sound, and there is false adhesion between the book slot on the leather case and the backing paper.
除上述装订相关工序质量外,打孔两头须居中、孔口平齐、无毛边,收口位为1mm,铁线不超过书芯。这样,给人以不乏现代美感中的纯朴、而更兼有现代工艺中的精致,总是把这些细节处理的很好,让精装书看起来更高 档。
In addition to the quality of the binding process mentioned above, the two ends of the hole should be in the middle, the hole should be flush, without burr, the closing position should be 1 mm, and the iron wire should not exceed the book block. In this way, it gives people not only the simplicity of modern aesthetic feeling, but also the delicacy of modern craft. They always deal with these details well, making the hardcover book look more high-grade.
总之,一本好的精装书并非偶然所得,制作过程中需各工序质量的严格把关,直到后面工序产品质量完全合格。
In a word, a good hardcover book is not obtained by accident. In the production process, we need to strictly control the quality of each process until the product quality of the later process is completely qualified.
流程共分三条线,即书芯、书封和套合。
The process is divided into three lines, namely book block, book cover and sleeve.
书芯加工流程:半成品印张开始→撞页→开料→粘、套页→粘环衬→配页→锁线→半成品检查→压平→堆积压平→切书→捆书→涂黏合剂~→干燥分本→切书→
Book block processing process: semi finished sheet printing → page bumping → cutting → gluing and page setting → gluing ring lining → page matching → sewing → semi finished product inspection → flattening → stacking and flattening → book cutting → book binding → applying adhesive ~ → drying and Book splitting → book cutting →
涂黏合剂→扒圆→起脊→涂黏合剂→ 潮湿→粘书签丝带→粘堵头布→涂黏合剂→粘书背布→粘书背纸→涂黏合剂→粘筒子纸。
Apply adhesive → pick circle → ridge → apply adhesive → wet → stick bookmark ribbon → stick plug cloth → apply adhesive → stick book back cloth → stick book back paper → apply adhesive → stick bobbin paper.
书封加工流程:计算书封壳各料尺寸→开料→涂黏合剂→组壳→包壳塞角→压平→自然干燥→烫印。
Book seal processing flow: calculate the size of each material of the book seal shell → cutting → coating adhesive → shell assembly → shell plug angle → flattening → natural drying → hot stamping.
套合加工流程:涂中缝黏合剂→套壳→压槽→扫衬→压平定型→自然干燥→成品检查→包护封→包装贴标识。
The process flow of nesting: apply the middle seam adhesive → sleeve shell → groove pressing → lining sweeping → flattening and shaping → natural drying → finished product inspection → package protection → package labeling.
感谢您的阅读,希望以上内容能对您有所帮助,如您想了解更多精彩内容请点击我们的官网:济南精装书制作https://www.sdhzyw.com
Thank you for reading, hope the above content can help you, if you want to know more wonderful content, please click our official website: Jinan hardcover book production http://www.sdhzyw.com .

声明:文章来源于https://www.sdhzyw.com/

相关产品 / Related products